OmniMount Front Projector Ceiling Mount (PMD1)
from OmniMount
- Universal grid and complete mounting kit fits virtually all projectors
- Slide together mounting plates for quick install/remove and accepts security padlocks
- Integral cable management
- Includes snug to ceiling mount or an adjustable pipe mount for 12" to 18"
This unique universal projector mount fits standard 1 1/2" pipe drop.
Projector Ceiling Mount for Sony VPL-VW40 VPL-VW50 VPL-VW60 VPL-HW10 VPL-VW100 VPL-VW200
from BeamUp USA
- Ceiling mount can be rotated 360° and tilted to 35° (Side to Side, tilt Up & Down)
- Low profile 4.5" from the ceiling.
- CNC Precision machined from 6061-T6 aluminum (Aircraft aluminum)
- Works with vaulted ceilings
- It is suitable for projectors with weight to 50 Lbs
The DH200-L Ceiling Mount is for mounting inverted LCD/DLP projector into a ceiling. DH200-L Mount are constructed of high strength aluminum, anodized to prevent from scratching and are designed for quick and easy installation. The ball joint provides the greatest range of Yaw, Pitch & Roll. The mounting plate does not completely cover the projector. Only the area for the mounting holes is covered and the rest of the projector is open. Therefore no heat can be trapped which will increase the life cycle of your projector.
Mustang MV-PROJSP Universal Projector Mount
from Mustang
- Fits 95 percent of all projectors on the market (small and medium)
- Cable management within rod
- Tilt and pitch flexibility: +20 degrees/ -20 degrees
- supports mounting patterns up to 9 x 6 inches
- Weight Capacity: 37 pounds
Create versatile installation options and position your projector at virtually any angle with the MV-PROJSP. With its shift, pitch and rotation capabilities, this spider mount allows for convenient and secure projector installations. It offers an adjustable length from 11.42 - 32 inches and supports small to medium-sized projectors weighing up to 15 pounds (7 kilograms).
DH400 Projector Ceiling Mount for Panasonic PT-AE2000U PT-AE1000U PT-AX100U PT-AX200U
from BeamUp USA
- Suitable for projectors with the weight to 22 Lbs
- Can be rotated 360° and tilted to 45°
- CNC Precision machined from solid Aluminum
- Minimum 4.5" from ceiling, Maximum 9" from ceiling
- Anodized to prevent from scratching
A PRODUCT MADE IN USA We are the only manufacturer to offer a professional Designed Projector Ceiling Mount DH400. This mount makes it possible to adjust your projector optimal in height, millimeter by millimeter, avoiding additional "trapeze adjustment" on your projector. This allows you to project your picture to your screen without any quality loss. The DH400 Projector Ceiling Mount can be adjusted horizontally and vertically by the use of two ball joints. The professional Design Ceiling Mount DH400 is continuously adjustable in length 4-1/2 to 9 inch and is lateral adjustable up to 5 inch to keep your projector always in alignment with the screen.
Projector Ceiling Mount DH200 L for Sony, Panasonic, Optoma, Infocus, Mitsubishi, Sharp, Dell)
from BeamUp USA
- Profesional Design made from Aluminum
- Fully Adjustable mount, Work on vaulted ceiling.
- low profile 4.5" from the ceiling.
- Suitable for Projectors with the weight to 50 Lbs.
- Quick and easy installation
The DH200L Projector Ceiling Mount is for mounting inverted LCD / DLP projector into ceiling. DH200L Projector ceiling mounts are constructed of high strength aluminum, anodized to prevent from scratching and are designed for quick and easy installation.
Mustang MV-PROJSP-FLAT Universal Projector Flush Mount
from Mustang
- Mounts flush to the ceiling and works with nearly all projector brands
- Features full 360 degree rotation
- Tilt and pitch flexibility: +20 degrees/ -20 degrees
- Quick disconnection for simple maintenance
- Weight capacity: 33 pounds; lifetime warranty
The MV-PROJSP-FLAT allows for convenient and secure projector installation on ceilings. Designed with the price-conscious consumer in mind, it can support projectors weighing up to 25 pounds (11.4 kilograms) and works with nearly all projector brands.
Projector Ceiling Mount Dh400 for (Sony, Panasonic,Sanyo, Optoma, Infocus, Mitsubishi, Sharp, Benq)
from BeamUp USA
- Ceiling mount can be rotated 360° and tilted to 40° (Side to Side, tilt Up & Down)
- CNC Precision machined from 6061-T6 aluminum (Aircraft aluminum)
- Works with vaulted ceilings, Easy installation
- Minimum 4.5" from the ceiling, Maximum 9" from the ceiling
- Horizontal position left & Right 2.5" from center
Professional Designed projector Ceiling Mount DH400. This Mount makes it possible to adjust your projector optimal in height, millimeter by millimeter, avoiding additional "trapeze adjustment" on your projector. This allows you to project your picture to your screen without any quality loss. The mounting plate does not completely cover the projector. Only the area for the mounting holes is covered and the rest of the projector is open. Therefore no heat can be trapped which will increase the life cycle of your projector. The DH400 Ceiling Mount can be adjusted horizontally and vertically by the use of two ball joints. This will guarantee optimum projection of your picture to the screen. The professional design Ceiling Mount DH400 is continuously adjustable in length 4.5" - 9" and is lateral adjustable up to 5" to keep your projector always in alignment with the screen. The pro-Design-Ceiling Mount DH400 is supplied with counter-sunk screws. With the screws fully tightened and almost invisible you can install projectors up to 22 Lbs in weight without effort to any requested position down to the millimeter. There are a lot suppliers of ceiling mounts which might be able to be used for some projectors but not for all. For example the type of mounting varies from manufacture to manufacturer. In this cases the projector can not be mounted to all available mounting points on the projector. Since each mounting plate is being manufactured individually for each model, it is 100% guarantied that all mounting points on the projector will fit.
SANUS SYSTEMS VMPR1 Visionmount Projector Mount
from Sanus
- Matches almost every projector on the market
- Four adjustable legs for proper alignment
- Theft-resistant Armor Lock security
- Includes mounting hardware
The Sanus System Universal Projector Ceiling Mount is designed to simplify installation for projector ceiling mount. With options that fit most currents projectors, this mount provides a quality universal solution for all installations. The Model VMPR1 is low-profile flush mounting and fastens to the ceiling with a heavy-duty flush mount plate. Also, this mount has an independent roll, pitch and yaw mechanism that allows for quick and easy positioning of each othese motions. These adjustments are maintained even after disconnecting the projector. Built-in leveling feet, no spacers required Decorative shrouds hide both the ceiling and projector interfaces
OmniMount PRO PM1 - Mounting kit ( extension column, ceiling mount, mounting adapter ) for projector - silver
from OmniMount
- Slide together mounting plates for quick install/removal
- Built in pitch/tilt controls; Adjustable extension tube, ceiling mount and dress flange
- Integrated cable management; Security hardware & accepts padlocks
- Max projector footprint: 6.75" x 10.9" (171.5 x 277mm); 30 lb. (13.6 kg) max weight capacity
- Complete mounting hardware kit
Products from OmniMount Systems are recognized for their groundbreaking design, highest quality, and long-term reliability. Today OmniMount offers hundreds of mounting solutions to meet the needs of nearly any application.PRODUCT FEATURES:Universal projector mount for small/medium projectors;Slide together mounting plates for quick install/removal;Adjustable extension tube;Built in pitch/tilt control;Ceiling mount and dress flange.
DH100 Projector Ceiling Mount for (Sony, Panasonic, Optoma, Infocus, Mitsubishi, Sharp)
from BeamUp USA
- Low Profile 4 1/2" from Ceiling
- CNC Precision machined from 6061-T6 aluminum (Aircraft aluminum)
- Color: Mate Silver anodized
- Horizontal spin:360° pitch +/- 35° Roll +/- 35°
- Suitable for projectors with the weight to 22 Lbs
Projector Ceiling Mount can be rotated 360° and tilted to 35°. It can be fixated in any desired position. It is suitable for projectors with the weight of up to 22lb. Mounting plate is made of high quality aluminum. It comes in triangular shape with three mounting holes and in square shape with four mounting holes. The mounting plate does not completely cover the projector. Only the area for the mounting holes is covered and the rest of the projector is open. Therefore no heat can be trapped which will increase the life cycle of your projector.
+++
